|
|
| |
|
| |
|
Dental Simulators |
|
| |
|
| |
 |
Frasaco - Modeling reality |
Remember that one day,
You'll be treating real patients
Made in Germany |
|
|
| Modelling reality |
| |
There’s only one thing closer to reality than frasaco’s phantom heads, jaw and teeth models and strip crowns, and that’s the real thing itself. |
That’s what has made frasaco the world’s premier choice for universities and dental students. After studying with models, students will have to treat real patients, which is why the simulation must be as realistic as possible. The success of the renowned frasaco strip crown is based upon this fundamental approach.
|
|
|
|
|
| |
|
| |
|
Dental Training Systems |
|
| |
|
| |
Thanks to the various mounting assemblies, our phantom heads are easily fitted to any workbench or table thus saving space. The mechanically stable construction is ideal for teaching purposes. Either with or without shoulder torso, the phantom head can also be mounted securely on a dental chair. The correct working procedures, patient positioning and ergonomic posture can be learnt right from the very beginning.
Being a strategic partner of many manufacturers that specialize in turnkey solutions for complete phantom labs, frasaco can offer taylor-made solutions exactly fitting your individual needs, thanks to the modular design of our dental training systems. |
|
|
|
| |
|
|
|
| |
|
| |
 |
|
PH-2
The new frasaco PH-2 phantom head is ideal for users that are looking for an inexpensive product without accepting compromises in the jaw part properties. Its precision articulator system is exactly the legendary one that made the frasaco P-5/3 series the international standard for under- and postgraduate courses worldwide.
The skull dome and face mask however are reduced to the front part only, so the artificial patient’s face will have the familiar look of the P-5/3, while the detachable front parts allow easy changing of face mask and dental models. An inner cheek mask is available for working with water.
Using a frasaco mounting system, PH-2 can easily be brought into all necessary working positions.
PH-2 is also a perfect start into the world of the frasaco simulation system, as there is even an upgrade – kit to turn the PH-2 into a P-5/3 at a later stage.
|
|
| |
|
|
|
|
| |
 |
|
PH-2 PT
Dental Exercise Unit complete with:
phantom head PH-2
face half mask P-6 GTM
dental model AG-3
table mounting assembly P-TDG
Recommnendation for usage: Table mounting allows working in 9 to 12 o'clock position. The articulator part, which has already been successfully on the market in the frasaco P-5/3 and today's P-6/3 series allows the simulation of anatomically correct jaw movements. |
|
| |
|
|
|
|
| |
|
|
|
|
| |
Mounting Assemblies for phantom heads and dental models |
|
| |
|
|
|
|
| |
P-TDG
P-TDGP |
|
| |
|
|
|
|
| |
 |
|
|
|
| |
|
|
|
| |
Table mounting assembly
with clamp, double balljoint
and guidance rod.
Recommended for phantom
heads P-6/5*, P-6/3*,
PH-1 and PH-2. |
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
P-6/3 the standard
frasaco phantom head P-6 with exchangeable articulator P-3
This new edition following the legendary frasaco P-5/3 features many detail product improvements. The articulator P-3 has anatomically shaped condyle boxes to allow for simulation of corresponding human masticatory functions within three-dimensional curved condylar paths. The model jaws and articulations are positioned in the correct anatomical relationship and the natural excursions of the mandible can be reproduced exactly. The vertical adjustment allows for mounting of different model jaws.
The robust skull dome is coloured throughout in grey with a plastic coat of approx. 3 mm thickness, to prevent paint to splinter off and to allow scratches to be polished out. The neck articulation is located in the anatomically correct position at the cranial base and is used to position the head. The robust lift inside the skull dome provides access to a starwheel bolt which releases the face mask holding plate. In order to allow anatomical face bows to be mounted, a nose has been added to the skull dome and the articulator P-3 is provided with corresponding fixing pins. Should the mandible be opened to 15 mm distance between upper and lower incisal edges, a deflection roller makes the heads of the condyles slide forward as with a patient. All components are made of high-grade materials and all fixing bolts are protected against loss. A face mask can be gripped between the liftplate and the articulator plate. |
|
| |
|
|
|
|
| |
|
|
|
|
| |
 |
|
P-6/3 PT
Dental Exercise Unit complete with:
phantom head P-6/3
face mask P-6 GM
dental model AG-3
table mounting assembly P-TDGP
Recommendation for usage: phantom head with table mounting for working in 9 to 12 o'clock sitting position, left-or right hand. |
|
| |
|
|
|
|
| |
|
|
|
|
| |
Mounting |
|
| |
|
|
| |
 |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
 |
|
 |
|
|
| |
|
|
|
|
| |
|
|
|
|
 |
|
|
|
|
| |
| |
|
|
|
|
| |
|
|
|
|
| Dental Training Systems - Dental
Simulators |
| |
|
|
| |
 |
|
| |
|
|
|
|
| |
|
| |
Example for ordering a complete frasaco phantom head:
|
|
| |
|
|
| |
Dental Simulators
JTJ-V |
|
| |
|
|
| |
|
|
| |
|
|
| |
The JTJ series dental workbench with the accessories of clinical treatment system.under the laboratory environment which simulate realistically various clinical treatment process;
including inside of the outside of repair and orthodontic etc, attain the purpose of training and testing. |
| |
| |
Dental Simulators
JTJ-I |
|
| |
|
|
| |
|
|
| |
|
|
| |
The JTJ series dental workbench with the accessories of clinical treatment system.under the laboratory environment which simulate realistically various clinical treatment process;
including inside of the outside of repair and orthodontic etc, attain the purpose of training and testing.he JTJ series dental workbench with the accessories of clinical treatment system.under the laboratory environment which simulate realistically various clinical treatment process;including inside of the outside of repair and orthodontic etc, attain the purpose of training and testing. |
|
| |
| |
Dental Simulators
JTJ-II |
|
| |
|
|
| |
 |
|
| |
|
|
| |
The JTJ series dental workbench with the accessories of clinical treatment system.under the laboratory environment which simulate realistically various clinical treatment process;
including inside of the outside of repair and orthodontic etc, attain the purpose of training and testing. |
|
| |
|
|
| |
|
STUDENT - Dental Students Workbench |
|
| |
|
| |
Complete system for 2 students reproducing the dental clinic environment and simulating realistically various
clinical treatment procedures. |
|
|
|
| |
| |
| Specifications : |
1. |
Structure made in metal with high temperature polyester coating |
2. |
Worktop made in Medium Density Fiber Wood with high temperature
polyester coating |
3. |
One power supply plug & one PSI pressure gauge |
|
| |
| Each Student position includes: |
1. |
Rotating delivery unit |
2. |
One 3-way Syringe |
3. |
Two handpiece positions (RM or BC to be defined) |
| 4. |
Individual spray power adjustement |
| 5. |
Clean water system with bottle and water regulator |
| 6. |
Adjustable dental light (16.000 and 20.000 LUX) |
| 7. |
Pedal with spray selection |
| 8. |
Holder for the phantom head |
|
|
|
 |
|
|
|
| |
|
| |
 |
|
One power supply plug & one PSI pressure gauge:
Structure made in metal with high temperature polyester coating.
Workshop made in medium Density Fiber Wood with high temperature polyester coating. |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
 |
|
